UNIOR Slipper torque wrench - 264 1/4" 2 - 24Nm - 615485

​​Reversible ratchet head

Adjustable from 2 to 24 Nm

Torque appllication: oneway, but always apply in direction specified on torque wrench handle

Ratchet operates in clockwise and anti-clockwise directions

For tightening on left and right hand threads

Unmistakable signal when set torque is reached

Default value for the recalibration interval is 12 month of use, or approximately 5.000 cycles!

Made according to standard ISO 6789

Dual scaled, Nm and Kgm

Length 270mm

Square 1/4"

Important!

Do not use torque wrench for untightening!

Torque tightens only in the direction showed on the key sticker! Sticker shows the proper direction of tightening!

The default calibration interval of the torque wrench is 12 months or 5.000 measurements from the date of end user purchase.

ALWAYS set the measuring mechanism to starting point, at the end of work.

When the requested torque are reached, please do not tight any more.

Torque wrench can be damaged, if manual instructions are not considered.