RNOKS DESIGNS Suspension Vise Soft Jaw for Shocks 7/8" to 1-1/4" UN4

This clamp allows a solid and safe clamping method to hold your fork in a vise when it comes time to service your fork.

Item Specs:

• Two 12x3mm Neodymium magnets per half - quite strong.
• Width: 135mm
• 3D printed using PETG filament, a stronger alternative to the commonly used PLA material. Print settings built around strength (high fill% settings, thick perimeter walls).
• Material is soft enough to not damage your steerer tube but strong enough to hold it tight.
• Made in the USA.

Compatibility (non-exhaustive)

• 28.6mm / 1-1/4": Fox 36/40 FIT R and 36/40 FIT RC2 damper base-valve body
• 25.4mm / 1": Fox X damper (base valve body) & some rear shock damper cylinders, Fox 32 FIT Terralogic damper cylinder, Marzocchi Doppio air-spring cylinder
• 23.8mm / 15/16": Fox 36 O/B R damper base-valve body, Shimano Saint and XTR front hub thru-axle
• 22.2mm / 7/8": Manitou Cartridge Intrinsic & TPC Cartridge damper cylinder