WHEELS Lockring Socket for crank arm bolt cap XTR M91000 - XTR-CAP-DRIVER

€15.90
Tax included

Brand: Wheels MFG 

Model: XTR-CAP-DRIVER

Material: Aluminium 

Compatibility: XTR M9100 

Sorry, no items left.
Quantity
2
Out-of-Stock

This tool is specifically designed to remove and install the crank arm bolt cap on Shimano-XTR-M9100 series crank arms.

Servicing crank arms or removing damaged M9100 crank arm bolts has never been easier.

Designed to be used with a 3/8” drive socket or torque wrench for easy installation and removal. 

With its high-quality construction and precision engineering, the XTR Cap Driver is an excellent addition to your bike tool arsenal.

To remove the bolt cap on your Shimano-XTR-M9100 series crank arm using the Wheels Manufacturing XTR Cap Driver, follow these steps:

Removing the Bolt Cap

  1. Place the XTR Cap Driver in the crank arm bolt cap, ensuring that it fits snugly.
  2. Grab your 3/8" drive socket or torque wrench and insert it into the tool.
  3. Turn the tool clockwise to remove the crank arm bolt cap. Apply steady, even pressure to avoid damaging the crank arm or bottom bracket.
  4. Inspect the cap and the crank arm for any damage or wear, and replace any damaged components as needed.

To install the bolt cap, simply follow these steps:

  1. Place the XTR Cap Driver in the crank arm bolt cap and make sure it's snug.
  2. Use the tool with your 3/8" drive socket or torque wrench to turn the cap counterclockwise until it's snug.
  3. For best results, use a torque wrench to ensure you're tightening the bolt to the manufacturer's recommended specifications.
WMF OUT XTR-CAP-DRIVER

Data sheet

Bearing press / Extractor
Extractors
Category
Tools

Specific References

WHEELS Lockring Socket for...

€15.90

You might also like