CMH Bike brake caliper piston spreader - 3 widths
Brand: CMH Available in: standard 26mm (orange) narrow 19mm (black) wide 36mm (red)
CMH Thru-axle pin for QR cassette tools
Brand: CMH
CMH Gauge for Shimano HG 10/11 and SRAM XD/XDR Freehub
Brand: CMH
HOPE/CMH V4 piston seal service tool
Brand: CMH
HOPE/CMH E4 & RX4+ piston seal service tool
Brand: CMH
HOPE/CMH X2 piston seal service tool
Brand: CMH
CMH syringe cap - for 10ml, 20ml and 50ml
Brand: CMH Available sizes : 10Ml, 20Ml and 50Ml The syringe are sold separately and are not included in the product. Caps are sold by unit
CMH Tubeless syringe mountable clip - for...
Brand: CMH Available sizes : 10Ml; 20Ml, 50Ml and 100Ml The syringe are sold separately and are not included in the product. Clips are sold by unit
CMH 36/45°Angle gauge for headset bearings
Brand: CMH Demo video
CMH Spoke nipple clamp tool by Wheelworks NZ
Brand : CMH by Wheelworks NZ Quickly replace a broken spoke without fear of the spoke nipple falling into the rim. Allows for replacing the spoke without pulling the tire or rim tape. More info on the original - and the designer - available at https://www.wheelworks.co.nz/tools/
CMH Spoke nipple shuffler V2 (new version)
Brand: CMH
CMH Bicycle saddle "80 mm point" jauge - MA3
Brand: CMH
CMH Cycling measurement tools conical- MA1
Brand: CMH
CMH Cycling measurement tools - MA2
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system Sram GREEN
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system Shimano...
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system Shimano RED
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system Sram ORANGE
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system Sram YELLOW
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system Shimano...
Brand: CMH
CMH “Uniblock” brake bleeding/maintenance system TRP GREY
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system HOPE E4/RX4
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system HOPE V4
Brand: CMH
CMH HOPE V4 brake caliper alignment tool
Brand: CMH Model: HOPE10
CMH HOPE E4 / RX4+ brake caliper alignment tool
Brand: CMH Model: HOPE11
CMH HOPE X2 brake caliper alignment tool
Brand: CMH Model: HOPE12
CMH Magnetic brake hose clamping blocks for use with...
Brand : CMH For use with KNIPEX wrench Pliers 150 / 180 /250mm Sold in pairs.
CMH ‘Uniblock’ brake bleeding/maintenance system Magura...
Brand: CMH
CMH ‘Uniblock’ brake bleeding/maintenance system Magura...
Brand: CMH
CMH 11/12 speeds Chain damage checker - CHN11/12
Brand: CMH Model: CHN11/12 Chain speed: 11/12 Quickly check for damaged links on 11 and 12 speed chains.Place the tool over the chain and run the chain through, any damaged link will catch.Much faster and more accurate than a visual check.You'll notice that it does catch on the quick link in the...
CMH 9/10 Speeds Chain damage checker - CHN9/10
Brand: CMH Model: CHN9/10 Chain speed: 9/10 Quickly check for damaged links on 11 and 12 speed chains.Place the tool over the chain and run the chain through, any damaged link will catch.Much faster and more accurate than a visual check.You'll notice that it does catch on the quick link in the...
CMH Quarq power meter battery cover removal tool
Brand: CMH
CMH M14x1.5 /M15x1.75 Grease gun adapter
Brand: CMH Male thread: M15x1.5 Female thread: M15x1.75 Thread lenght: 8mm Allows M15x1.75 threaded grease tubes (Blub, Ront, R.S.P., etc.) to be adapted to M14x1.5 threaded guns.