125x12x1,5mm Front axle - FB1250BK001
Axle for front hub Axle Pitch (S): M12x1.5mm Diameter (D): 12mm Total length (L): 125mm Thread length (T): 16mm
12x1.5mm wheel axle nut - Øout 18.9mm
Spoke nipples x8pcs
Matérial: brass Sizes: 12x2mm, 14x2mm, 16x2mm
HOPE Pro 5/Pro4/Evo/Pro 2 - 6 Bolt Front Conversion Kit -...
Brand: Hope Part Nr.: HUB1009-14N Mounted on opposite side of disc. Compatible with Pro 2/Evo/Pro 4 Front Center-Lock freewheel
HOPE Pro 2 Evo/Pro 4/Xc3/Xc6 Drive-Side Spacer - 12mm...
Brand: Hope Part Nr: HUB471 Compatible with Pro 2 Evo/Pro 4/Xc3/Xc6 rear hubs. Freewheel body side. Sizes : 12X142mm on "classic" 135mm hubs 12X148mm on BOOST hubs 148mm 12X157mm on 150mm hubs 12X177mm on FATSNO hubs 170mm 12X197mm on FATSNO 190mm hubs
SMR17287 LLB Bearing 17x28x7 STAINLESS
Brand: Enduro Bearings Model: SMR17287 LLB Quality: STAINLESS Size (ID x OD x width): 17x28x7
S6903 LLB Bearing 17x30x7 STAINLESS
Brand: Enduro Bearings Model: S6903 LLB Quality: STAINLESS Size (ID x OD x width): 17x30x7
S6804 LLB Bearing 20x32x7 STAINLESS
Brand: Enduro Bearings Model: S6804 LLB Quality: STAINLESS Size (ID x OD x width): 20x32x7
S6902 LLB Bearing 15x28x7 STAINLESS
Brand: Enduro Bearings Model: S6902 LLB Quality: STAINLESS Size (ID x OD x width): 15x28x7
S3802 W LLB Bearing 15x24x10 STAINLESS
Brand: Enduro Bearings Model: S3802 W LLB Quality: STAINLESS Size (ID x OD x width): 15x24x10
SMR22378 LLB-E Bearing 22x37x8/11.5 STAINLESS
Brand: Enduro Bearings Model: SMR22378 LLB-E Quality: STAINLESS Size (ID x OD x width): 22x37x8/11.5
HOPE PRO 5 Drive-Side Spacer |12MM | MicroSpline |...
Brand: Hope Part Nr: HUB1018-49S X12mm cup for Pro 5 hubs: 12X142mm / 12X148mm / 12X157mm Side: Freewheel Body Compatibility: Shimano Micro-Spline Inner diameter: 15mm axle side Outside diameter: 21mm axle side Length: 19.6mm Weight: 8g
HOPE PRO 5 Drive-Side Spacer |12MM | MicroSpline |...
Brand: Hope Part Nr: HUB1018-48S 12mm cup for Pro 5 hubs: 12X135mm / 12X150mm Side: Freewheel Body Compatibility: Shimano Micro-Spline Internal diameter: 15mm on axle side Outer diameter: 21mm on axle side Length: 16.6mm Weight: 8g
CMH Spoke nipple clamp tool by Wheelworks NZ
Brand : CMH by Wheelworks NZ Quickly replace a broken spoke without fear of the spoke nipple falling into the rim. Allows for replacing the spoke without pulling the tire or rim tape. More info on the original - and the designer - available at https://www.wheelworks.co.nz/tools/
MAVIC ID360 ROAD freewheel spring by unit - V2251801
Brand: MAVIC Part Nr.: V2251801
MAVIC ID360 Hub tool - V2550201
Brand: MAVIC Part Nr.: V2550201
MAVIC ID360 lobe insert kit - V2252701
Brand: MAVIC Part Nr.: V2252701
MAVIC M7 Aluminium Spoke Wrench - M40652
Brand: MAVIC Part Nr.: M40652