DRAPER Torque wrench 1/4" 5-25Nm - 78639

Système cliquet réversible

Adjustable from 5 to 25 Nm

Length 255mm

Square 1/4"

Supplied in blow mould case

Important!

• Do not use torque wrench for untightening!
• Torque tightens only in the direction showed on the key sticker! Sticker shows the proper direction of tightening!
• The default calibration interval of the torque wrench is 12 months or 5.000 measurements from the date of end user purchase.
• ALWAYS set the measuring mechanism to starting point, at the end of work.
• When the requested torque are reached, please do not tight any more.
• Torque wrench can be damaged, if manual instructions are not considered.