RNOKS DESIGNS Suspension Vise Soft Jaw for Shocks 21/32" to 53/64" UN5

This clamp allows a solid and safe clamping method to hold your fork in a vise when it comes time to service your fork.

Item Specs:

• Two 12x3mm Neodymium magnets per half - quite strong.
• Width: 135mm
• 3D printed using PETG filament, a stronger alternative to the commonly used PLA material. Print settings built around strength (high fill% settings, thick perimeter walls).
• Material is soft enough to not damage your steerer tube but strong enough to hold it tight.
• Made in the USA.

Compatibility (non-exhaustive)

• 21.0mm / 53/64": Shimano 15mm thru-axle front hub
• 19.5mm / 3/4": Fox dampers, base valve body (R, RL, RLC, RLT)
• 18.7mm / 47/64": Fox Gen 3 O/B RL damper cylinder
• 17.5mm / 11/16": Fox 36/40 FIT RC2 damper cylinders, TALAS Lower Air Shaft
• 16.7mm / 21/32": Fox FIT 32 RL & RLC damper-cartridge body