Brake adaptor PM-IS front 160mm 35425

Compatibility:

Rear mount (frame): this adapter will only work with 160mm discs.

Front mount (fork): This adapter will only work with 180mm discs.

Tested with Shimano, SRAM and Campagnolo flatmount calipers.

Specific 160mm calipers such as Hope and Campagnolo will increase the rotor size by 20mm.

Front specific calipers such as Hope and Campagnolo will not work with these adapters.

IMPORTANT: This adapter will not be compatible with all standard IS frames and forks (see below). The clamp and adapter extend out from the mounting surface. Clearance between the mounting brackets is required.

If you are in any doubt, please send us photos of the mounting brackets on your frame or fork.